Neets USB Switch - 2

Power cut for 2 sec. when switching ports allows the projector to recognize the source change!

Neets 306-0013. Host interface: USB 2.0, Hub interfaces: USB 2.0. Colour of product: Black. Width: 25 mm, Depth: 70 mm, Height: 125 mm

306-0013


5711783420637
  • 7 på fjernlager (1 dag til lager Oslo )

Mer informasjon om produktet

Neets USB Switch - 2 also allows easy switching between a fixed main computer and a laptop without requiring any software, just like Neets USB Switch 1.

The difference lays in the Power Switch Delay that cuts power for 2 seconds when switching between ports that allows the projector to recognize the change of source.

Furthermore, this switch has a built in amplifier which makes it possible to extend the cables up to 10 meters on each side of the switch.

- Switches between two devices
Allows easy switching between a fixed main computer and a laptop
- Supports USB 2.0 standard
- Manual or priority modes
Use external button for switching computers, or allow automatic priority switching when second computer is connected
- No software installation required
Switch responds to external command or data signal presence
- Can be mounted in trunking system
- Built-in Extender
Extends cable length up to 10 meters on each side of the switch
- Power Switch Delay
Cuts power for 2 sec. when switching between ports
- User friendly
Simply press a button or connect and start second computer

* EET kan ikke holdes ansvarlig for feil i bilder, beskrivelser og spesifikasjoner levert av Icecat
The Perfect Complement to Interactive Whiteboard Installations
 
Interactive whiteboards are now commonly used in school classrooms and corporate boardrooms, and normally the whiteboards are connected via USB to a permanently installed main computer. However, when an instructor of visiting speaker wishes to use his or her own laptop computer, connecting to the interactive board can be troublesome.
 
Neets USB Switch solves the problem. It offers convenient switching between the two computers, connecting either computer to the interactive board as required. No software installation is required, as the system responds to either a contact closure in manual mode or the presence
of a new USB connection in priority mode.
 
Neets USB Switch is easily mounted in a trunking system, with the unit's dimensions making it
an easy fit inside and mounting flanges on both ends for securing. Installation is fast and easy, using standard USB connectors and plug-in Euroblock connectors.
 
Highlights:
 
Switches between two devices
Allows easy switching between a fixed main computer and a laptop.
Supports USB 2.0 standard
Manual or priority modes
Use external button for switching computers, or allow automatic
priority switching when second computer is connected.
No software installation required
Switch responds to external command or data signal presence.
Can be mounted in trunking system
User friendly
Simply press a button or connect and start second computer.
Built-in Extender
Extends cable length up to 20 meters.
Power Switch Delay
Cuts power for 2 sec. when switching between ports.
Tilkoblingsevne
VertsgrensesnittUSB 2.0
Antall porter3
Grensesnitt (hub)USB 2.0
Antall USB 2.0-porter3
Energihåndtering
Strømstyrke12
Driftsspenning5
Egenskaper
ProduktfargeBlack
Vekt og dimensjoner
Bredde25 mm
Dybde70 mm
Høyde125 mm
Vekt90 g
BildeKlikk her for å se bilde
* EET kan ikke holdes ansvarlig for feil i bilder, beskrivelser og spesifikasjoner levert av Icecat
Legg til favoriter
Fjern.
Fjern fra denne lsitenRemove from this list
Sist besøkt
Innlogget bruker har besøkt denne side.
Favoritter
Varen er i din favoritt liste.
Motta lagervarsel
Vi sender deg gjerne en mail så snart varen ankommer vårt lager.
Rabatt
Rabatt er basert på standard pris og er trukket fra.